0800 FASTLANE
0800 FASTLANE
Part Number: 101-0116This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fur...
View full detailsPart Number: 125-1000Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible wit...
View full detailsPart Number: 101-0117Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.Features: O2 Bung and Plug
Part Number: 114-1000KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will re...
View full detailsPart Number: 105-1000The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/f...
View full detailsPart Number: 101-0053Donut style 8mm hole Includes plug and pin kit
Part Number: 114-2000Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual k...
View full detailsPart Number: 101-0102Medium Diameter Trigger wheel – Small and Large sizes also available. 24 tooth 175 diameter 40mm centre
Part Number: 101-0101Large Diameter Trigger wheel – Small and Medium sizes also available. 60-2 tooth 200mm diameter 40mm centre
Part Number: 101-0048Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA &...
View full detailsPart Number: 101-0077Includes Plug Kit - 2 way Bosch Style plug, terminals and boot M12 Thread
Part Number: 101-0193Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT t...
View full detailsPart Number: 101-0050Weld in Steel Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a...
View full detailsPart Number: 101-0049Weld in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount v...
View full detailsPart Number: 101-0046Weld in Aluminium boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (N...
View full detailsPart Number: 101-0047Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-...
View full detailsPart Number: 101-0186High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mat...
View full detailsPart Number: 101-0025Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with al...
View full detailsPart Number: 101-0146Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Inclu...
View full detailsPart Number: 101-0034Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of eth...
View full detailsPart Number: 101-0280Hall effect sensor designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provi...
View full detailsPart Number: 101-0100Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are ...
View full detailsPart Number: 101-0162 The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated...
View full detailsPart Number: 101-0298The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged...
View full detailsPart Number: 101-0165The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applic...
View full detailsPart Number: 101-0295The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged...
View full detailsPart Number: 100-0113
Part Number: 101-00085 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has...
View full detailsPart Number: 101-00020.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’...
View full detailsPart Number: 101-0033Dual core screen cable for use with trigger signals and knock sensors - 10m per pack
Part Number: 101-00095 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has...
View full detailsPart Number: 101-0195
Part Number: 101-00105 m, to suit obsolete G4 Atom and Lightning only. Does NOT fit G4+ Atom
Part Number: 101-00524 x EV14 1000cc fuel injectors in their unmodified form as they come from Bosch. Injectors are tested and graded into flow mat...
View full detailsPart Number: 101-0289USCar Fuel Injector Connector Kit Includes: Housing Crimp terminals Terminal seals Seal locating tab Locking tab
Part Number: 101-0288Injector Adapter - USCar (Male) to Bosch Junior Timer/Jetronic (Female) Fits Bosch Junior Timer/EV1/Jetronic injector and conn...
View full details