Accessories

Part Number: 101-0001Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatib...

Part Number: 101-0164This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged application...

AF9289-075-01 - SILICONE HEATER 3/4" 19mm CAPSold Individually, 3 Ply PolyesterPart Number: AF9289-075-01The Aeroflow reinforced silicone heater bl...

Part Number: 101-0106Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion conne...

AF9289-038-01 - SILICONE HEATER 3/8" 10mm CAPSold Individually, 3 Ply PolyesterPart Number: AF9289-038-01The Aeroflow reinforced silicone heater bl...

Part Number: 101-0226The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters...

AF150-14S - HEX HOSE FINISHER 28.5MM IDSilver FinishPart Number: AF150-14SHex Hose finishers are designed to add a completed appearance to your hos...

AF9289-062-01 - SILICONE HEATER 5/8" 16mm CAPSold Individually, 3 Ply PolyesterPart Number: AF9289-062-01The Aeroflow reinforced silicone heater bl...

Part Number: 101-0045Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Part Number: 101-0076Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Part Number: 101-0199Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP t...

Part Number: 101-0163 The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged a...

Part Number: 135-1000Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and ...

Part Number: 101-00062.5 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom h...

Part Number: 101-00052.5 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom h...

Part Number: 101-0225Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes F...

Part Number: 101-0211Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6Pin round CAN connector on the front of t...

Part Number: 101-0015More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to...

Track Claw Tire Strengthener is designed to strengthen and vulcanize the rubber of a tire by becoming part of it, adding more elasticity and str...

Franklin Engineering Limited is proud to design and manufacture this custom dipstick compatible with Mazda 13B rotary engines. Designed to improve...

Billet radiator top bracket set for Nissan R32, R33 & R34 Skyline vehicles.Step height - 13.5mm - R32/R33 8.5mm - R34 23.5mm - R34 The ...

Part Number: 101-0054Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knockl...

Part Number: 101-0103Small Diameter Trigger wheel – Medium and Large sizes also available. 24 tooth 150mm diameter 40mm centre

Part Number: 101-0320Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitab...

Part Number: 101-0080Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and Wiring Up to 150 PSI above at...

Part Number: 101-0034Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of eth...

Part Number: 110-0005

Part Number: 100-0113

Part Number: 101-00030.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’...

Part Number: 101-00095 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has...

Part Number: 101-0044This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuil...

Part Number: 100-0170Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length. Features: Sample lap and split times as well as speed,...

Part Number: 101-0286Includes housings, wedgelocks and pins. 7.5A

Part Number: 101-0239Rugged 12 key CAN Keypad with interchangeable 15mm inserts (sold separately). Custom button inserts and configurable RGB indic...

Part Number: 101-0020Field Installable CAN Plug - Can be used to wire in to the 6 pin CAN port on Link G4/G4+/G4X ECUs that have a round 6 pin CAN ...

Part Number: PFEAF-7535CProflow's valve cover breathers are offered in shielded and non-shielded versions. These are suitable for all catch cans, v...